Bio MP™ (5-3-2)
Bio MP is a unique soil additive that combines molasses with NPK and micronutrients to provide benefits to both soils and plants. Molasses stimulates soil biological activity by providing a high carbohydrate food source for soil microbes, while the macro and micro nutrients improve overall plant vigor and color.
| Total Nitrogen (N) | 5.00% |
| 4.10% Ammoniacal Nitrogen 0.90% Nitrate Nitrogen |
|
| Available Phosphate (P2O5) | 3.00% |
| Soluble Potash (K2O) | 2.00% |
| Iron (Fe) | 0.15% |
| 0.15% Water Soluble Iron (Fe) | |
| Manganese (Mn) | 0.15% |
| 0.15% Water Soluble Manganese (Mn) | |
| Zinc (Zn) | 0.15% |
| 0.15% Water Soluble Zinc (Zn) |
NonPlant Food Ingredients:
| Soluble Carbohydrates (Molasses) | 14.00% |
| Citric Acid | 2.00% |
- Carbon source
- Promotes soil microbial activity
- Increases tolerance of multiple stresses
- Improves overall plant vigor
- Source of micronutrients
- Improves color
1 Gallon Jug – #57621
2.5 Gallon Jug – #57622
30 Gallon Drum – #57623
275 Gallon Tote – #57625
- Low levels of soil microbial activity
- Thatch build-up on the surface or as a sub-surface layer
Bio MP can be applied through fertigation, conventional spray, or root injection. It may be applied alone or tank mixed with other products✝. Shake well before using.
Conventional Spray:
Apply 6 to 15 oz. diluted in 2 to 2.5 gallons of water per 1,000 sq. ft. (2 to 5 gallons diluted in 80 to 100 gallons of water per acre) per month. To maximize performance, rates may be split into weekly or bi-weekly applications.
Soil Drench:
Mix 1 – 2 fl. oz. of Bio MP per gallon of water. Drench to thoroughly saturate the root zone. Repeat application monthly or as needed.
Root Injection:
Dilution Rate: Mix 32 fl. oz. of Bio MP per 100-gallon tank. Apply as needed.
Operating pressure: 150 – 200 lbs PSI or ½ gal per 4 seconds
Area Method: Trees: Apply 50 gallons of solution per 1,000 sq. ft. Inject 4-8 inches into the soil where the feeder roots typically occur. Begin injections 1-3 feet out from the trunk to avoid injury to large roots and work in a grid pattern away from the tree to within 2 feet of the drip line. Apply 1 pint (16 fl. oz.) of diluted solution per injection site at 18 inch spacing or ½ gallon (64 fl. oz.) of diluted solution per injection site at 3 foot spacing.
Shrubs: Apply 50 gallons of solution per 1,000 sq. ft. Inject one pint (16 fl. oz.) of diluted solution per injection site. Inject 4-6 inches into the soil with 18 inch spacing between injections.
DBH Method: Use the chart below to determine the volume of diluted solution to apply per inch of trunk diameter at breast height (DBH).
| Tree Size (DBH Inch) | Diluted Solution / Inch DBH |
|---|---|
| Very Small (1-4”) | 0.5 gallon (64 fl. oz) |
| Sm (5-7”) | 1 gallon |
| Sm – Med (8-11”) | 1.5 gallons |
| Medium (12-15”) | 2 gallons |
| Med – Lrg (15-19”) | 2.5 gallons |
| Large (20+”) | 3 gallons |
✝ Compatibility: perform a standard jar test to check compatibility with other products before mixing.
