Hydretain ES Plus

• Drought stress and wilt
• Localized dry spots
• Watering restrictions
• High water costs
• Poor plant establishment due to insufficient watering
• Winter desiccation

Mark Mahady & Associates Deficit Irrigation Study
2020 Product Evaluation for Enhanced Performance of a 328 Bermudagrass Fairway Subject to 40% ET Deficit Irrigation
Read

Western Illinois University Nutrient Uptake Study
Hydretain increase nutrient uptake for macro, secondary and micro nutrient values compared to controls
Read

University of Illinois at Urbana – Champaign
Effect of Hydretain Applied at Seeding for Turfgrass Establishment
Read

University of Illinois
Peppers, tomatoes and turfgrass show watering reduction from 47-74% over controls per gram of dry matter
Read

Hydretain ES Plus may be applied through fertigation, soil drench or conventional spray. It may be applied alone or tank mixed with other products.✝

Dilution: Hydretain ES Plus is a concentrated formula designed for large scale applications. Dilute with water before applying. Minimum dilution rate 15:1 (water to Hydretain). Hydretain ES Plus may be tank mixed or applied through injectors and fertigation systems.

Turf:
Apply 9 oz. of Hydretain ES Plus per 1,000 sq. ft. (3 gallons per acre) by spray or drench. Water in with at least 1/10 inch of water within the first couple of hours to insure Hydretain is washed off foliage and into the soil. Within 24 hours, follow with enough additional water to carry Hydretain down to and throughout the root zone. (The amount of additional water required to carry Hydretain throughout the root zone is dependent on the depth of the root zone of the treated area.) Reapply once every 3 months or maintain monthly at 1/3 rate after initial full rate application.

Overseeding, Sodding, Sprigging:
Apply 9 oz. per 1,000 sq. ft. by spray or drench after seeding, sodding or sprigging. Water in with only enough water to rinse Hydretain off foliage and into the soil at seed level or the root area of new sod or sprig. An application of Hydretain ES Plus made prior to overseeding, sodding or sprigging and watered into the root zone will manage soil moisture for existing turf during new turf establishment.

Trees, Shrubs & Individual Plants:
Dilute Hydretain ES Plus at a rate of 2 oz. per gallon of water and apply by drench thoroughly saturating the root zone. For maximum effectiveness on trees apply 4 to 8 ounces of concentrate for each inch of trunk diameter. Dilution rate is variable from 50:1 to 300:1.

Potted or Containerized Plants:
Dilute Hydretain ES Plus at a rate of 2 oz. per gallon of water and apply by drench, thoroughly saturating the planting media. Media should be dry enough to hold as much diluted Hydretain as possible. Hydretain ES Plus may be applied through existing injectors at rates between 50:1 and 100:1. Higher dilution rates may require multiple applications to achieve desired results.

Large Planters & Gardens:
Dilute Hydretain ES Plus at a rate of 2 oz. per gallon of water or through injectors at a rate of 50:1 to 100:1 and apply at a rate of 2 ounces of concentrate per 60 sq. ft of area. One gallon treats 4,000 square feet. For Best Results: Water thoroughly when re-watering Hydretain treated plants.

For Best Results: Apply to damp soil. Additional Hydretain ES Plus may be required to correct difficult and extreme dry spot areas. Hydretain may be applied at up to 5 times the general application rate as a single treatment or in multiple applications. Hydretain ES Plus is biodegradable. For maximum effectiveness reapply every three months or when required watering becomes more frequent. Reapply if a reduction in watering is not apparent within the first two weeks.

Wetting Agents & Penetrants: Hydretain ES Plus contains an excellent soil surfactant designed specifically to allow water and applied Hydretain to penetrate through thatch layers and hydrophobic soils down to and throughout the root zone.

✝ Compatibility: perform a standard jar test to check compatibility with other products before mixing.