BloomPlex® (8-16-5)
For Enhanced Flowering and Fruiting
BloomPlex is specially formulated with high quality sources of phosphorus to promote flowering and fruiting as well as root development. It also contains micronutrients and is an ideal product for use in seasonal color beds.
Total Nitrogen (N) | 8.00% |
1.64% Ammoniacal Nitrogen 0.63% Nitrate Nitrogen 5.73% Urea Nitrogen |
|
Available Phosphate (P2O5) | 16.00% |
Soluble Potash (K2O) | 5.00% |
Calcium (Ca) | 0.25% |
Iron (Fe) | 0.10% |
0.10% Chelated Iron | |
Manganese (Mn) | 0.05% |
0.05% Chelated Manganese | |
Zinc (Zn) | 0.05% |
0.05% Chelated Zinc |
- Enhanced blooming
- Improved stress tolerance
- Promotes establishment of flowers, ornamentals and vegetables
- Increased vigor due to greater root growth
32 oz Quart – # 57532
1 Gallon Jug – # 57533
2.5 Gallon Jug – # 57534
30 Gallon Drum – # 57535
275 Gallon Tote – # 57536
- Poorly established plants
- Phosphorus deficiency symptoms
- Poor flower or fruit development
BloomPlex can be applied through fertigation, soil drench or foliar spray. It can be applied alone or tank mixed with other products✝. One gallon of BloomPlex contains 1.69 lbs. of phosphorus as P2O5 and 0.85 lbs. of nitrogen. Refer to the table below to find the volume of fertilizer to apply to achieve the desired amount of phosphorus. Shake well before using.
Desired lbs. of P2O5 (Corresponding N Fluid Ounces) |
Fluid Ounces |
---|---|
0.08 (0.04 lbs. of N) | 6.0 |
0.10 (0.05 lbs. of N) | 7.5 |
0.125 (0.06 lbs. of N) | 9.5 |
0.25 (0.125 lbs. of N) | 18.9 |
*Apply in 2 gallons of water per 1,000 sq. ft. **Apply in 80 gallons of water per acre
Annuals and Perennials (Including Fruit, Vegetables, and Herb Gardens):
Installation: Apply 6 to 12 oz. of BloomPlex in 50 gallons of water per 100 sq. ft.
Maintenance: Mix 12 oz. of BloomPlex per 50 gallons of water. Apply 1 quart of
diluted solution per sq. ft. For foliar spray, mix 1 oz. of BloomPlex per 2 gallons of
water and spray foliage to the point of runoff. Reapply every 4 to 6 weeks or as needed
throughout the growing season.
Flowering Shrubs:
Installation: Apply 6 to 12 oz. of BloomPlex in 3 to 5 gallons of water per 100 sq. ft.
Maintenance: Mix 2 quarts of BloomPlex per 100 gallons of water. Apply 1 to 4 quarts
of diluted solution per shrub depending on the size, using the lower rate for smaller
shrubs and the higher rate for larger shrubs. Apply to the soil at the base of each shrub.
Reapply every 4 to 6 weeks or as needed throughout the growing season.
✝ Compatibility: perform a standard jar test to check compatibility with other products before mixing.